Gap Filling using wood slithers
What is used to fill the gaps between the floor boards?
For the best finish Floor Sanding Partners ltd will always use reclaimed wood slithers made from reclaimed pine to fill the gaps between your floorboards. The sizes for wood slithers very from 2 mm to 8 mm thick.
When can wood slithers be used
Generally the floors with gaps 2 mm - 8 mm wide are perfect for wood slithers. If the gaps are less then 2 mm wide we recommend Resin, and if the gaps are more then 8 mm wide we will have to look at rearranging some of the boards.
How long will wood slithers stay in the gaps
We have used wood slithers for over 12 years and we get a lot of positive feedback from our customers/clients. It is a success in the floor sanding industry .
How wood slithers are fitted
Our team will will check the floor prior to fitting the wood slithers. The floor will need to be repaired and made solid where required and if possible. Then we will glue either side of the wood slithers and hammer these in. The excess of the wood slithers will be cut off using a multi-tool then after that the floor is sweeped and vacuumed. Our team will start the sanding processes and may decide to use resin filler for a better finish.